KZ ZSX
Phenomenal 12 Units Hybrid Technology Earphones
TERMINATOR OF HYBRID TECHNOLOGY SERIES
The Low-Frequency Power
has Strengthened Again!
Equipped With A New 10mm Double Magnetic Dynamic
Based on the previous generation of dual magnetic units, by further optimizing the magnetic flux, the magnetic gap is reduced. The angle of the low-frequency floating region of the diaphragm is adjusted. Let the overall low-frequency performance bring improvement and dive more.
Upgrade the frequency range again!
Add customized mid-high frequency balanced armature combination.
Two sets of DWEK medium and high frequency moving iron are superimposed with a 30095 high frequency moving iron, which has detailed resolution and reproduces the real sound of different instruments. The increase of the frequency range is more abundant in high-frequency details, and the vocals are fuller.
This Is The Strength Of The 12-unit Hybrid Technology
Subversive Acoustic Technology
Single side 1 low frequency dynamic + 2 sets of DWEK medium and high frequency balanced armature combination +130095 high frequency balanced armature. The Terminator of Hybrid technology Series, Comprehensive and powerful detail restore effect.
1. New Bass Frequency 10mm dynamic
2. Mid and High-Frequency BA combination
3. High Frequency balanced armature
4. Mid and High-Frequency BA combination
Redesign The Lower Shell From The Perspective Of Ergonomics
Improve Wearing Stability
KZ ZSX is comfortable fit the contour of human ears, real long wear without pain.
Physical + Electronic Compound Tuning Pursuing a Broad and Balanced Natural Timbre
Through reasonable cavity structure settings, finely balancing the vocal channels of each unit, the depth of the longitudinal sound field is appropriate, and the details are rich and durable.
*The above data are measured by KZ Acoustics Laboratory. Actual use may vary slightly depending on the situation.
2PIN Pluggable Cable Design Autonomous Definition The Earphone Play
Bluetooth Module Assembly - Switch to Bluetooth earphones quickly. Assemble Silver Plated Cable - Improve the sound quality.
* Upgrade cable must be purchased separately.
Bluetooth Module Assembly
Switch to Bluetooth earphones quickly
Assemble Silver Plated Cable
Improve the sound quality.
HD Condenser Microphone
KZ ZSX supports standard mobile phone HD call
Press Two Times
Next Song
Even Press Three Times
Previous Song
Superb Zinc Alloy Craft Cover
Luxurious And Sharp Texture
KZ ZSX has a durable and robust zinc alloy cover + imported resin cavity. The exterior design is as shining and sharp as ever.
3.5mm gold plated pin
3.5mm gold-plated L-type plug reduces signal transmission loss. KZ ZSX is compatible with various devices such as computers, tablets, mobile phones, players, etc.
Aluminum alloy sound outlet
The metal pipe is rigid. The non-deformable feature guarantees the integrity of the sound of each outlet.
Two specifications, different choices
Specifications
Plug Type:
3.5mm gold plated
Pin Type:
0.75mm gold plated
Dynamic:
10mm double magnetic dynamic x 1
DWEK Mid & High frequency balanced armature x 2
30095 High frequency balanced armature x 1
*The above data are measured by KZ Acoustics Laboratory. Actual use may vary slightly depending on the situation.
Wire Pluggin Schematic
Correctly distinguish Right And Left headphones and wires, as shown.
There are left and right logos on the wire, "L" is on the left, and "R" is on the right. The front of the headset is placed with the silicone sleeve facing left to the left and the silicone sleeve facing to the right, which is the right side.
The correct assembly of the wire is with the needle head and "L R" logo facing up. Do not assemble the pinhead down, and it will harm sound quality.
Point the wire to the plug and push it in until it fits perfectly.
Since the wire is a design that does not easily come off, please be careful when inserting or pulling.
Schematic Diagram Of Headset Wearing
Correctly distinguish right and left headphones, "L" for left, "R" for right.
Straight headphones inserted into the ear, correct wear, comfortable wear, excellent sound insulation performance.
Fix the headset wire behind the ear.
Press and hold the headset panel to adjust the seal.
Adjust earphone wire and fix earphones.
Plug the headset plugs into the play-back device and use it to adjust the volume before the headset is plugged into the device.
